0
Привет, У меня возникла проблема с API-интерфейсом планировщика заданий в моей программе QT C++. Я использовал код примера для триггера входа в систему here.Ошибка API планировщика заданий 80041318
Первая ошибка я получил CoInitializeSecurity не удалось: RPC_E_TOO_LATE что означает
CoInitializeSecurity уже назвали. в зависимости here. Поэтому я прокомментировал вызов coinitializesecurity, и он исправил это.
Однако теперь я получаю ошибку 80041318 при попытке сделать последние RegisterTaskDefinition Шаг. Я читал here, это означает неправильное форматирование или вне диапазона, а также, возможно, неправильный аргумент pLogonTrigger. Я попытался прокомментировать начальный пограничный и конечный код границы для pLogonTrigger, который не помог. Я также изменил изменение pLogonTrigger UserId и параметра userId на функцию RegisterTaskDefinition на мою учетную запись как L «Josh». Единственные аргументы для оставшихся pLogonTrigger указаны через put_Id и put_UserId.
Должен ли я включать какой-либо код, если это поможет, и если да, то какой код? Код в значительной степени идентичен коду примера, за исключением модификаций pLogonTrigger, модов userId и комментариев от cointializesecurity.
* Edited Код Добавлено
void Replicator::taskCreate()
{
/*QProcess *taskProcess = new QProcess(this);
QString program = "schtasks.exe";
QStringList arguments;
arguments << "/create" << "/XML" << "rep.xml" << "/tn" << "task";
taskProcess->start(program, arguments);*/
// ------------------------------------------------------
// Initialize COM.
QString code;
HRESULT hr = CoInitializeEx(NULL, COINIT_APARTMENTTHREADED);
if(FAILED(hr))
{
//updateStatus("\nCoInitializeEx failed: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
switch (hr)
{
case S_OK:
code = "S_OK";
break;
case S_FALSE:
code = "S_FALSE";
break;
case RPC_E_CHANGED_MODE:
code = "RPC_E_CHANGED_MODE";
break;
}
updateStatus("CoInitializeEx failed: " + QString("%1").arg(hr,8,16,QLatin1Char('0')) + code);
return;
}
// Set general COM security levels.
/* hr = CoInitializeSecurity(
NULL,
-1,
NULL,
NULL,
RPC_C_AUTHN_LEVEL_PKT_PRIVACY,
RPC_C_IMP_LEVEL_IMPERSONATE,
NULL,
0,
NULL);
if(FAILED(hr))
{
switch (hr)
{
case S_OK:
code = "S_OK";
break;
case RPC_E_TOO_LATE:
code = "RPC_E_TOO_LATE";
break;
case RPC_E_NO_GOOD_SECURITY_PACKAGES:
code = "RPC_E_NO_GOOD_SECURITY_PACKAGES";
break;
//case E_OUTOFMEMORY:
// code = "E_OUTOFMEMORY";
// break;
}
updateStatus("CoInitializeSecurity failed: " + code);
CoUninitialize();
return;
}*/
// ------------------------------------------------------
// Create a name for the task.
LPCWSTR wszTaskName = L"Jerp";
// Get the windows directory and set the path to notepad.exe.
wstring wstrExecutablePath = _wgetenv(L"WINDIR");
wstrExecutablePath += L"\\SYSTEM32\\NOTEPAD.EXE";
// ------------------------------------------------------
// Create an instance of the Task Service.
ITaskService *pService = NULL;
hr = CoCreateInstance(CLSID_TaskScheduler,
NULL,
CLSCTX_INPROC_SERVER,
IID_ITaskService,
(void**)&pService);
if (FAILED(hr))
{
updateStatus("Failed to create an instance of ITaskService: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
CoUninitialize();
return;
}
// Connect to the task service.
hr = pService->Connect(_variant_t(), _variant_t(),
_variant_t(), _variant_t());
if(FAILED(hr))
{
updateStatus("ITaskService::Connect failed: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pService->Release();
CoUninitialize();
return;
}
// ------------------------------------------------------
// Get the pointer to the root task folder. This folder will hold the
// new task that is registered.
ITaskFolder *pRootFolder = NULL;
hr = pService->GetFolder(_bstr_t(L"\\") , &pRootFolder);
if(FAILED(hr))
{
updateStatus("Cannot get Root Folder pointer: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pService->Release();
CoUninitialize();
return;
}
// If the same task exists, remove it.
pRootFolder->DeleteTask(_bstr_t(wszTaskName), 0 );
// Create the task builder object to create the task.
ITaskDefinition *pTask = NULL;
hr = pService->NewTask(0, &pTask);
pService->Release(); // COM clean up. Pointer is no longer used.
if (FAILED(hr))
{
updateStatus("Failed to create a task definition: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
CoUninitialize();
return;
}
// ------------------------------------------------------
// Get the registration info for setting the identification.
IRegistrationInfo *pRegInfo= NULL;
hr = pTask->get_RegistrationInfo(&pRegInfo);
if(FAILED(hr))
{
updateStatus("Cannot get identification pointer: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
//hr = pRegInfo->put_Author(L"Author Name");
BSTR authorName = SysAllocString(L"Josh");
hr = pRegInfo->put_Author(authorName);
pRegInfo->Release();
if(FAILED(hr))
{
updateStatus("Cannot put identification info: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
// ------------------------------------------------------
// Create the settings for the task
/*ITaskSettings *pSettings = NULL;
hr = pTask->get_Settings(&pSettings);
if(FAILED(hr))
{
updateStatus("Cannot get settings pointer: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
// Set setting values for the task.
hr = pSettings->put_StartWhenAvailable(VARIANT_TRUE);
pSettings->Release();
if(FAILED(hr))
{
updateStatus("Cannot put setting info: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}*/
// ------------------------------------------------------
// Get the trigger collection to insert the logon trigger.
ITriggerCollection *pTriggerCollection = NULL;
hr = pTask->get_Triggers(&pTriggerCollection);
if(FAILED(hr))
{
updateStatus("Cannot get trigger collection: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
// Add the logon trigger to the task.
ITrigger *pTrigger = NULL;
hr = pTriggerCollection->Create(TASK_TRIGGER_LOGON, &pTrigger);
pTriggerCollection->Release();
if(FAILED(hr))
{
updateStatus("Cannot create the trigger: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
ILogonTrigger *pLogonTrigger = NULL;
hr = pTrigger->QueryInterface(
IID_ILogonTrigger, (void**) &pLogonTrigger);
pTrigger->Release();
if(FAILED(hr))
{
updateStatus("QueryInterface call failed for ILogonTrigger: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
hr = pLogonTrigger->put_Id(_bstr_t(L"Trigger1"));
if(FAILED(hr))
updateStatus("Cannot put the trigger ID: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
// Set the task to start at a certain time. The time
// format should be YYYY-MM-DDTHH:MM:SS(+-)(timezone).
// For example, the start boundary below
// is January 1st 2005 at 12:05
/*hr = pLogonTrigger->put_StartBoundary(_bstr_t(L"2005-01-01T12:05:00"));
if(FAILED(hr))
updateStatus("Cannot put the start boundary: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
hr = pLogonTrigger->put_EndBoundary(_bstr_t(L"2025-05-02T08:00:00"));
if(FAILED(hr))
updateStatus("Cannot put the end boundary: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));*/
// Define the user. The task will execute when the user logs on.
// The specified user must be a user on this computer.
//hr = pLogonTrigger->put_UserId(_bstr_t(L"DOMAIN\\UserName"));
//hr = pLogonTrigger->put_UserId(_bstr_t(L"JOSHDESKTOP10\\Josh"));
hr = pLogonTrigger->put_UserId(_bstr_t(L"Josh"));
pLogonTrigger->Release();
if(FAILED(hr))
{
updateStatus("Cannot add user ID to logon trigger: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
// ------------------------------------------------------
// Add an Action to the task. This task will execute notepad.exe.
IActionCollection *pActionCollection = NULL;
// Get the task action collection pointer.
hr = pTask->get_Actions(&pActionCollection);
if(FAILED(hr))
{
updateStatus("Cannot get Task collection pointer: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
// Create the action, specifying that it is an executable action.
IAction *pAction = NULL;
hr = pActionCollection->Create(TASK_ACTION_EXEC, &pAction);
pActionCollection->Release();
if(FAILED(hr))
{
updateStatus("Cannot create the action: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
IExecAction *pExecAction = NULL;
// QI for the executable task pointer.
hr = pAction->QueryInterface(
IID_IExecAction, (void**) &pExecAction);
pAction->Release();
if(FAILED(hr))
{
updateStatus("QueryInterface call failed for IExecAction: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
// Set the path of the executable to notepad.exe.
hr = pExecAction->put_Path(_bstr_t(wstrExecutablePath.c_str()));
pExecAction->Release();
if(FAILED(hr))
{
updateStatus("Cannot set path of executable: " + QString("%1").arg(hr,8,16,QLatin1Char('0')));
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
// ------------------------------------------------------
// Save the task in the root folder.
IRegisteredTask *pRegisteredTask = NULL;
/*hr = pRootFolder->RegisterTaskDefinition(
_bstr_t(wszTaskName),
pTask,
TASK_CREATE_OR_UPDATE,
//_variant_t(L"Builtin\\Administrators"),
_variant_t(L"Josh"),
_variant_t(),
TASK_LOGON_PASSWORD,
_variant_t(L""),
&pRegisteredTask);*/
hr = pRootFolder->RegisterTaskDefinition(
_bstr_t(wszTaskName),
pTask,
TASK_CREATE_OR_UPDATE,
//_variant_t(L"Builtin\\Administrators"),
_variant_t(),
_variant_t(),
TASK_LOGON_GROUP,
_variant_t(L""),
&pRegisteredTask);
if(FAILED(hr))
{
switch (hr)
{
case E_ACCESSDENIED:
code = "E_ACCESSDENIED";
break;
case E_OUTOFMEMORY:
code = "E_OUTOFMEMORY";
break;
case SCHED_S_BATCH_LOGON_PROBLEM:
code = "SCHED_S_BATCH_LOGON_PROBLEM";
break;
case SCHED_S_SOME_TRIGGERS_FAILED:
code = "SCHED_S_SOME_TRIGGERS_FAILED";
break;
}
updateStatus("Error saving the Task : " + QString("%1").arg(hr,8,16,QLatin1Char('0')) + code);
pRootFolder->Release();
pTask->Release();
CoUninitialize();
return;
}
updateStatus(" Success! Task successfully registered. ");
// Clean up
pRootFolder->Release();
pTask->Release();
pRegisteredTask->Release();
CoUninitialize();
}
показать свой код – eyllanesc
ОК только что добавил, спасибо за помощь –